Directions

To Eliminate Algae Growth:

1. Brush tile and walls of Pool.
2. Backwash Filter.
3. Disconnect slide and automatic pool cleaner from pool support system.
4. Adjust water pH to 7.2-7.4 range.
5. Raise chlorine residual to 3 ppm.
6. Wait 15 Minutes after adding chlorine.
7. Add ALGAEDYN through skimmer at the rate of 8 oz. every 10 minutes until the recommended dosage of 8 oz. of ALGAEDYN per 10,000 gallons of pool water is reached. If pool has no skimmer, add ALGAEDYN below water level in front of return by squeezing at the same rate mentioned above.
8. Keep filter in operation during treatment and for a minimum of 72 hours after treatment.
9. For best results, keep filter in operation until condition clears.

To Prevent Algae Growth Follow a Weekly Maintenance Application:

1. Brush tile and walls of pool.
2. Backwash filter.
3. Disconnect slide and automatic pool cleaner from pool support system.
4. Adjust pH to 7.2-7.4 range.
5. Raise Chlorine residual to 3 ppm.
6. Wait 15 minutes after adding chlorine.
7. Add ALGAEDYN at the rate of 4 oz. every 10 minutes until the recommended dossage of 4 oz of ALGAEDYN per 10,000 gallons of pool water is reached. If pool has no skimmer, add ALGAEDYN below water level in front of return by squeezing at the same rate mentioned above.
8. Keep filter in operation during treatment and for a minimum of 72 hours after treatment.
9. For best results, keep filter in operation until condition clears.

Silver Algaedyn is a metallic algaecide and bactericide that can prevent the growth of algae and bacteria for up to several weeks depending on the pH level of the pool water.  Silver algaecides are both algaecide and algaestat.  ie, it kills algae and bacteria and also prevents algae and bacteria.

Silver products are most effective in eliminating black fungi (algae) and bacteria (pink slime).